1 The SAS System 09:41 Wednesday, October 21, 2009 NOTE: Copyright (c) 2002-2003 by SAS Institute Inc., Cary, NC, USA. NOTE: SAS (r) 9.1 (TS1M3) Licensed to SY TRUONG, Site 0051884001. NOTE: This session is executing on the XP_PRO platform. NOTE: (E9BX04) SAS 9.1.3 SP 4 NOTE: SAS initialization used: real time 0.60 seconds cpu time 0.57 seconds NOTE: AUTOEXEC processing beginning; file is C:\apache\htdocs\cdiscbuilder\saspgm\autoexec.sas. NOTE: Libref _CDISC_ was successfully assigned as follows: Engine: V9 Physical Name: C:\apache\htdocs\cdiscbuilder\saspgm NOTE: AUTOEXEC processing completed. 1 /*------------------------------------------------------------* 2 * program: cdisc49.sas * 3 * Description: Case #49. Evaluation Interval Zero For All (Timing) variables, * 4 * this identifies records that violate the condition * 5 * [Evaluation Interval greater than or equal to 0], * 6 * limited to records where [Evaluation Interval is not null].* 7 * By: Sy Truong, 10/14/2009 * 8 *-------------------------------------------------------------*/ 9 10 libname templib '../data'; NOTE: Libref TEMPLIB was successfully assigned as follows: Engine: V9 Physical Name: C:\apache\htdocs\cdiscbuilder\data 11 12 *** Create some data to be selected ***; 13 data templib.qs(label="Questionnaires"); 14 attrib STUDYID label="Study Identifier" length=$100; 15 attrib DOMAIN label="Domain Abbreviation" length=$100; 16 attrib USUBJID label="Unique Subject Identifier" length=$100; 17 attrib QSSEQ label="Sequence Number" length=8; 18 attrib QSGRPID label="Group ID" length=$100; 19 attrib QSSPID label="Sponsor-Defined Identifier" length=$100; 20 attrib QSTESTCD label="Question Short Name" length=$100; 21 attrib QSTEST label="Question Name" length=$100; 22 attrib QSCAT label="Category of Question" length=$100; 23 attrib QSSCAT label="Subcategory for Question" length=$100; 24 attrib QSORRES label="Finding in Original Units" length=$100; 25 attrib QSORRESU label="Original Units" length=$100; 26 attrib QSSTRESC label="Character Result/Finding in Std Format" length=$100; 27 attrib QSSTRESN label="Numeric Finding in Standard Units" length=8; 28 attrib QSSTRESU label="Standard Units" length=$100; 2 The SAS System 09:41 Wednesday, October 21, 2009 29 attrib QSREASND label="Reason Not Performed" length=$100; 30 attrib QSBLFL label="Baseline Flag" length=$100; 31 attrib QSDRVFL label="Derived Flag" length=$100; 32 attrib VISITNUM label="Visit Number" length=8; 33 attrib VISIT label="Visit Name" length=$100; 34 attrib VISITDY label="Planned Study Day of Visit" length=8; 35 attrib QSDTC label="Date/Time of Finding" length=$100; 36 attrib QSDY label="Study Day of Finding" length=8; 37 attrib QSTPT label="Planned Time Point Name" length=$100; 38 attrib QSTPTNUM label="Planned Time Point Number" length=8; 39 attrib QSELTM label="Planned Elapsed Time from Time Point Ref" length=$100; 40 attrib QSTPTREF label="Time Point Reference" length=$100; 41 attrib QSRFTDTC label="Date/Time of Reference Time Point" length=$100; 42 attrib QSEVLINT label="Evaluation Interval" length=$100; 43 STUDYID = 'test';DOMAIN = 'test';USUBJID = '123';QSSEQ = 1;QSGRPID = 'test';QSSPID = 43 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 43 ! 'test'; 44 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = 'Y'; 44 ! QSEVLINT='P2M'; 45 output; 46 STUDYID = 'test';DOMAIN = 'test';USUBJID = '123';QSSEQ = 1;QSGRPID = 'test';QSSPID = 46 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 46 ! 'test'; 47 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = 'Y'; 47 ! QSEVLINT='P2M'; 48 output; 49 STUDYID = 'test';DOMAIN = 'test';USUBJID = '456';QSSEQ = 1;QSGRPID = 'test';QSSPID = 49 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 49 ! 'test'; 50 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = ''; 50 ! QSEVLINT='P2M'; 51 output; 52 STUDYID = 'test';DOMAIN = 'test';USUBJID = '456';QSSEQ = 1;QSGRPID = 'test';QSSPID = 52 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 52 ! 'test'; 53 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = 'Y'; 53 ! QSEVLINT='P2M'; 54 output; 55 STUDYID = 'test';DOMAIN = 'test';USUBJID = '789';QSSEQ = 1;QSGRPID = 'test';QSSPID = 55 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 55 ! 'test'; 56 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = ''; 56 ! QSEVLINT='P2M'; 57 output; 58 STUDYID = 'test';DOMAIN = 'test';USUBJID = '789';QSSEQ = 1;QSGRPID = 'test';QSSPID = 58 ! 'test';QSTESTCD = 'test';QSTEST = 'test';QSCAT = 'test';QSSCAT = 'test';QSORRES = 58 ! 'test'; 59 QSORRESU = 'test';QSSTRESC = 'test';QSSTRESU = 'test';QSREASND = 'test';QSBLFL = 'Y'; 59 ! QSEVLINT='-P2M'; 60 output; 61 run; NOTE: Variable QSSTRESN is uninitialized. 3 The SAS System 09:41 Wednesday, October 21, 2009 NOTE: Variable QSDRVFL is uninitialized. NOTE: Variable VISITNUM is uninitialized. NOTE: Variable VISIT is uninitialized. NOTE: Variable VISITDY is uninitialized. NOTE: Variable QSDTC is uninitialized. NOTE: Variable QSDY is uninitialized. NOTE: Variable QSTPT is uninitialized. NOTE: Variable QSTPTNUM is uninitialized. NOTE: Variable QSELTM is uninitialized. NOTE: Variable QSTPTREF is uninitialized. NOTE: Variable QSRFTDTC is uninitialized. NOTE: The data set TEMPLIB.QS has 6 observations and 29 variables. NOTE: DATA statement used (Total process time): real time 0.04 seconds cpu time 0.04 seconds 62 %cdisc(datlib=templib,datname=qs); 63 data misobs(keep=obsnum); 64 retain obsnum 0; 65 set templib.qs(keep=STUDYID); 66 obsnum=obsnum+1; 67 if missing(STUDYID) then 68 output; 69 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 70 data misobs(keep=obsnum); 71 retain obsnum 0; 72 set templib.qs(keep=DOMAIN); 73 obsnum=obsnum+1; 74 if missing(DOMAIN) then 75 output; 76 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 77 data misobs(keep=obsnum); 78 retain obsnum 0; 79 set templib.qs(keep=USUBJID); 80 obsnum=obsnum+1; 4 The SAS System 09:41 Wednesday, October 21, 2009 81 if missing(USUBJID) then 82 output; 83 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 84 data misobs(keep=obsnum); 85 retain obsnum 0; 86 set templib.qs(keep=QSSEQ); 87 obsnum=obsnum+1; 88 if missing(QSSEQ) then 89 output; 90 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 91 data misobs(keep=obsnum); 92 retain obsnum 0; 93 set templib.qs(keep=QSTESTCD); 94 obsnum=obsnum+1; 95 if missing(QSTESTCD) then 96 output; 97 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 98 data misobs(keep=obsnum); 99 retain obsnum 0; 100 set templib.qs(keep=QSTEST); 101 obsnum=obsnum+1; 102 if missing(QSTEST) then 103 output; 104 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds 5 The SAS System 09:41 Wednesday, October 21, 2009 cpu time 0.01 seconds 105 data misobs(keep=obsnum); 106 retain obsnum 0; 107 set templib.qs(keep=QSCAT); 108 obsnum=obsnum+1; 109 if missing(QSCAT) then 110 output; 111 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.MISOBS has 0 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 112 proc sort data=templib.qs out=noflag; 113 by usubjid QSBLFL; 114 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK.NOFLAG has 6 observations and 29 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 115 data noflag; 116 attrib _flag length=$1; 117 set noflag(keep=usubjid QSBLFL); 118 by usubjid QSBLFL; 119 retain _flag; 120 if first.usubjid then _flag=QSBLFL; 121 if last.usubjid and _flag = QSBLFL and _flag = 'N' then output; 122 run; NOTE: There were 6 observations read from the data set WORK.NOFLAG. NOTE: The data set WORK.NOFLAG has 0 observations and 3 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 123 data _26; 124 retain obsnum 0; 125 set templib.qs(keep=VISITNUM); 126 obsnum = obsnum + 1; 127 attrib visitnumc length=$50; 128 visitnumc = compress(visitnum); 129 if index(visitnumc,'.') gt 0 then visitnumc = compress(scan(visitnumc,2,'.')); 130 if length(compress(visitnumc))>2 then output; 6 The SAS System 09:41 Wednesday, October 21, 2009 131 run; NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column). 128:22 NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._26 has 0 observations and 3 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 132 data _31; 133 retain obsnum 0; 134 set templib.qs(keep=QSBLFL); 135 obsnum = obsnum + 1; 136 if trim(left(QSBLFL)) not in ('Y','') then output; 137 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._31 has 0 observations and 2 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 138 data _32; 139 retain obsnum 0; 140 set templib.qs(keep=QSDRVFL); 141 obsnum = obsnum + 1; 142 if trim(left(QSDRVFL)) not in ('Y','') then output; 143 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._32 has 0 observations and 2 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 144 data _40; 145 retain obsnum 0; 146 set templib.qs(keep=QSORRES QSDRVFL); 147 obsnum = obsnum + 1; 148 if QSORRES = '' and QSDRVFL ="Y" then output; 149 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._40 has 0 observations and 3 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 7 The SAS System 09:41 Wednesday, October 21, 2009 150 data _41; 151 retain obsnum 0; 152 set templib.qs(keep=QSSTRESC QSDRVFL); 153 obsnum = obsnum + 1; 154 if QSSTRESC = '' and QSDRVFL ="Y" then output; 155 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._41 has 0 observations and 3 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 156 data _42; 157 retain obsnum 0; 158 set templib.qs(keep=QSTEST); 159 obsnum = obsnum + 1; 160 if length(trim(left(QSTEST))) > 40 then output; 161 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._42 has 0 observations and 2 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 162 data _43(keep= obsnum QSTESTCD status); 163 retain obsnum 0; 164 set templib.qs(keep=QSTESTCD); 165 obsnum = obsnum + 1; 166 attrib status length=$50; 167 if length(trim(left(QSTESTCD))) > 8 then do; 168 status = 'greater than 8 characters.'; 169 output; 170 end; 171 if substr(QSTESTCD,1,1) in ('1','2','3','4','5','6','7','8','9','0') then do; 172 status = 'starts with a number.'; 173 output; 174 end; 175 spec = '~`@#$%^&*()-+={}|\][:";<>?,./'; 176 if index(QSTESTCD,"'") gt 0 then do; 177 status = 'contains special character(s).'; 178 output; 179 end; 180 else do; 181 do i=1 to length(trim(left(QSTESTCD))); 182 if index(spec,substr(QSTESTCD,i,1)) gt 0 then do; 183 status = 'contains special character(s).'; 184 output; 185 end; 8 The SAS System 09:41 Wednesday, October 21, 2009 186 end; 187 end; 188 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._43 has 0 observations and 3 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 189 data _49; 190 retain obsnum 0; 191 set templib.qs(keep=QSEVLINT); 192 obsnum = obsnum + 1; 193 if compress(QSEVLINT) ne '' then if substr(QSEVLINT,1,1)='-' then output; 194 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: The data set WORK._49 has 1 observations and 2 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 195 proc sort data=templib.qs out=qs nodupkey; 196 by usubjid; 197 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: 3 observations with duplicate key values were deleted. NOTE: The data set WORK.QS has 3 observations and 29 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds cpu time 0.03 seconds NOTE: Table WORK._72 created, with 3 rows and 1 columns. 198 proc sort data=templib.qs out=qs nodupkey; 199 by usubjid visitnum visit; 200 run; NOTE: There were 6 observations read from the data set TEMPLIB.QS. NOTE: 3 observations with duplicate key values were deleted. NOTE: The data set WORK.QS has 3 observations and 29 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 201 data qs; 202 attrib total length=$100; 9 The SAS System 09:41 Wednesday, October 21, 2009 203 set qs; 204 total = trim(left(usubjid))||'+'||compress(visitnum)||'+'||trim(left(visit)); 205 put total=; 206 keep total; 207 run; NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column). 204:44 total=123+.+ total=456+.+ total=789+.+ NOTE: There were 3 observations read from the data set WORK.QS. NOTE: The data set WORK.QS has 3 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 208 data sv; 209 attrib total length=$100; 210 set templib.SV; 211 total = trim(left(usubjid))||'+'||compress(visitnum)||'+'||trim(left(visit)); 212 put total=; 213 keep total; 214 run; NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column). 211:44 total=101+1+SCREEN total=101+2+DAY 1 total=101+3+WEEK 1 total=101+4+WEEK 2 total=101+8+FOLLOW-UP NOTE: There were 5 observations read from the data set TEMPLIB.SV. NOTE: The data set WORK.SV has 5 observations and 1 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds NOTE: Table WORK._73 created, with 3 rows and 1 columns. 215 proc sort data=cdisc nodupkey; 216 by libname datname datlab variable length label type case comment; 217 run; NOTE: There were 11 observations read from the data set WORK.CDISC. NOTE: 0 observations with duplicate key values were deleted. NOTE: The data set WORK.CDISC has 11 observations and 11 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds 10 The SAS System 09:41 Wednesday, October 21, 2009 cpu time 0.03 seconds 218 proc sort data = work.cdisc; 219 by libname datname datlab variable case; 220 run; NOTE: There were 11 observations read from the data set WORK.CDISC. NOTE: The data set WORK.CDISC has 11 observations and 11 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 221 222 proc format; 223 *** Generate the comments for the CDISC evaluation case number ***; 224 value $casefmt 225 '1' = '1' 226 '2' = '2' 227 '3' = '3' 228 '4' = '4' 229 '5' = '5' 230 '6' = '6' 231 '7' = '7' 232 '8' = '8' 233 '9' = '9' 234 '10' = '10' 235 '11' = '11' 236 '12' = '12' 237 '13' = '13' 238 '14' = '14' 239 '15' = '15' 240 '16' = '16' 241 '17' = '17' 242 '18' = '18' 243 '19' = '19' 244 '20' = '20' 245 '21' = '21' 246 '22' = '22' 247 '23' = '23' 248 '24' = '24' 249 '25' = '25' 250 '26' = '26' 251 '27' = '27' 252 '28' = '28' 253 '29' = '29' 254 '30' = '30' 255 '31' = '31' 256 '32' = '32' 257 '33' = '33' 258 '34' = '34' 259 '35' = '35' 11 The SAS System 09:41 Wednesday, October 21, 2009 260 '36' = '36' 261 '37' = '37' 262 '38' = '38' 263 '39' = '39' 264 '40' = '40' 265 '41' = '41' 266 '42' = '42' 267 '43' = '43' 268 '44' = '44' 269 '45' = '45' 270 '46' = '46' 271 '47' = '47' 272 '48' = '48' 273 '49' = '49' 274 '50' = '50' 275 '51' = '51' 276 '52' = '52' 277 '53' = '53' 278 '54' = '54' 279 '55' = '55' 280 '56' = '56' 281 '57' = '57' 282 '58' = '58' 283 '59' = '59' 284 '60' = '60' 285 '61' = '61' 286 '62' = '62' 287 '63' = '63' 288 '64' = '64' 289 '65' = '65' 290 '66' = '66' 291 '67' = '67' 292 '68' = '68' 293 '69' = '69' 294 '70' = '70' 295 '71' = '71' 296 '72' = '72' 297 '73' = '73' 298 '74' = '74' 299 '75' = '75' 300 '76' = '76' 301 '77' = '77' 302 '78' = '78' 303 '79' = '79' 304 '80' = '80' 305 '81' = '81' 306 '82' = '82' 307 '83' = '83' 308 '84' = '84' 309 '85' = '85' 310 '86' = '86' 311 '87' = '87' 312 '88' = '88' 12 The SAS System 09:41 Wednesday, October 21, 2009 313 '89' = '89' 314 '90' = '90' 315 '91' = '91' 316 '92' = '92' 317 '93' = '93' 318 '94' = '94' 319 '95' = '95' 320 '96' = '96' 321 '97' = '97' 322 '98' = '98' 323 '99' = '99' 324 '100' = '100' 325 '101' = '101' 326 '102' = '102' 327 '103' = '103' 328 '104' = '104' 329 '105' = '105' 330 '106' = '106' 331 '107' = '107' 332 '108' = '108' 333 '109' = '109' 334 '110' = '110' 335 '111' = '111' 336 '112' = '112' 337 '113' = '113'; NOTE: Format $CASEFMT has been output. 338 339 340 341 *** Generate the format for the bookmark of variables ***; 342 value $bookfmt 343 "qs.studyid" = 'qs.studyid' 344 "qs.domain" = 'qs.domain' 345 "qs.usubjid" = 'qs.usubjid' 346 "qs.qsseq" = 'qs.qsseq' 347 "qs.qsgrpid" = 'qs.qsgrpid' 348 "qs.qsspid" = 'qs.qsspid' 349 "qs.qstestcd" = 'qs.qstestcd' 350 "qs.qstest" = 'qs.qstest' 351 "qs.qscat" = 'qs.qscat' 352 "qs.qsscat" = 'qs.qsscat' 353 "qs.qsorres" = 'qs.qsorres' 354 "qs.qsorresu" = 'qs.qsorresu' 355 "qs.qsstresc" = 'qs.qsstresc' 356 "qs.qsstresn" = 'qs.qsstresn' 357 "qs.qsstresu" = 'qs.qsstresu' 358 "qs.qsreasnd" = 'qs.qsreasnd' 359 "qs.qsblfl" = 'qs.qsblfl' 360 "qs.qsdrvfl" = 'qs.qsdrvfl' 361 "qs.visitnum" = 'qs.visitnum' 362 "qs.visit" = 'qs.visit' 363 "qs.visitdy" = 'qs.visitdy' 364 "qs.qsdtc" = 'qs.qsdtc' 13 The SAS System 09:41 Wednesday, October 21, 2009 365 "qs.qsdy" = 'qs.qsdy' 366 "qs.qstpt" = 'qs.qstpt' 367 "qs.qstptnum" = 'qs.qstptnum' 368 "qs.qseltm" = 'qs.qseltm' 369 "qs.qstptref" = 'qs.qstptref' 370 "qs.qsrftdtc" = 'qs.qsrftdtc' 371 "qs.qsevlint" = 'qs.qsevlint' 372 ; NOTE: Format $BOOKFMT has been output. 373 374 *** Generate the format for dataset linking ***; 375 value $datfmt 376 "ae" = 'ae
' 377 "ae3a" = 'ae3a
' 378 "cdisc10" = 'cdisc10
' 379 "cdisc11" = 'cdisc11
' 380 "cdisc14" = 'cdisc14
' 381 "cdisc15" = 'cdisc15
' 382 "cdisc18" = 'cdisc18
' 383 "cdisc2" = 'cdisc2
' 384 "cdisc21" = 'cdisc21
' 385 "cdisc2b_1" = 'cdisc2b_1
' 386 "cdisc2b_2" = 'cdisc2b_2
' 387 "cdisc2b_3" = 'cdisc2b_3
' 388 "cdisc2_b" = 'cdisc2_b
' 389 "cdisc2_c" = 'cdisc2_c
' 390 "cdisc4" = 'cdisc4
' 391 "cdisc5" = 'cdisc5
' 392 "cdisc6" = 'cdisc6
' 393 "cdisc7" = 'cdisc7
' 394 "cdisc8" = 'cdisc8
' 395 "cdisc9" = 'cdisc9
' 396 "ce" = 'ce
' 397 "cm" = 'cm
' 398 "co" = 'co
' 399 "da" = 'da
' 400 "dm" = 'dm
' 401 "ds" = 'ds
' 402 "dv" = 'dv
' 403 "eg" = 'eg
' 404 "ex" = 'ex
' 405 "fa" = 'fa
' 406 "ie" = 'ie
' 407 "lb" = 'lb
' 408 "mb" = 'mb
' 409 "mh" = 'mh
' 410 "ms" = 'ms
' 411 "notdm" = 'notdm
' 412 "pc" = 'pc
' 413 "pe" = 'pe
' 414 "pp" = 'pp
' 415 "qs" = 'qs
' 416 "relrec" = 'relrec
' 14 The SAS System 09:41 Wednesday, October 21, 2009 417 "sc" = 'sc
' 418 "se" = 'se
' 419 "su" = 'su
' 420 "supmh" = 'supmh
' 421 "suppae" = 'suppae
' 422 "suppp" = 'suppp
' 423 "supte" = 'supte
' 424 "supvs" = 'supvs
' 425 "sv" = 'sv
' 426 "ta" = 'ta
' 427 "te" = 'te
' 428 "ti" = 'ti
' 429 "ts" = 'ts
' 430 "tv" = 'tv
' 431 "vs" = 'vs
' 432 ; NOTE: Format $DATFMT has been output. 433 run; NOTE: PROCEDURE FORMAT used (Total process time): real time 0.07 seconds cpu time 0.03 seconds 434 435 data work.cdisc; 436 set work.cdisc; 437 by libname datname datlab variable case; 438 439 attrib datvar label="Dataset and Variable" length=$100 format=$bookfmt.; 440 if variable ne '' then 441 datvar = compress(lowcase(datname) || "." || lowcase(variable)); 442 else datvar = lowcase(datname); 443 /*format case casefmt.;*/ 444 attrib charcase label = "Case Number" length = $10; 445 charcase = trim(left(put(case, best.))); 446 format charcase $casefmt.; 447 *format datname $datfmt.; 448 run; NOTE: There were 11 observations read from the data set WORK.CDISC. NOTE: The data set WORK.CDISC has 11 observations and 13 variables. NOTE: DATA statement used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 449 450 *** Remove The Special Characters ******; 451 proc template; 452 define style styles.test/store=work.test; 453 parent=styles.default; 454 style byline from titlesandfooters / 15 The SAS System 09:41 Wednesday, October 21, 2009 455 protectspecialchars=off; 456 end; NOTE: STYLE 'Styles.Test' has been saved to: WORK.TEST 457 run; NOTE: PROCEDURE TEMPLATE used (Total process time): real time 0.09 seconds cpu time 0.03 seconds 458 459 proc sort data = work.cdisc; 460 by libname datname datlab variable case; 461 run; NOTE: There were 11 observations read from the data set WORK.CDISC. NOTE: The data set WORK.CDISC has 11 observations and 13 variables. NOTE: PROCEDURE SORT used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 462 463 ods listing close; 464 ods html file='cdisc49.html' style=styles.mxistyle; NOTE: Writing HTML Body file: cdisc49.html 465 data work.qs (drop=usrname datetime); 466 set work.cdisc; 467 where lowcase(datname)=lowcase("qs"); 468 run; NOTE: There were 11 observations read from the data set WORK.CDISC. WHERE LOWCASE(datname)='qs'; NOTE: The data set WORK.QS has 11 observations and 11 variables. NOTE: DATA statement used (Total process time): real time 0.01 seconds cpu time 0.01 seconds 469 data qs(drop=xxx); 470 set qs; 471 retain xxx 0; 472 if xxx = 2 then xxx = 1; 473 else xxx = xxx + 1; 474 yyy = compress(put(xxx,best.)); 475 run; NOTE: There were 11 observations read from the data set WORK.QS. NOTE: The data set WORK.QS has 11 observations and 12 variables. NOTE: DATA statement used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 16 The SAS System 09:41 Wednesday, October 21, 2009 476 477 %let newlab = %nrbquote(Questionnaires); 478 title1 height=2 ' Findings from CDISC Evaluation'; 479 title2 height=2 "Data Table Name = qs Data Table Label=&newlab"; 480 footnote1 height=2 "Generated on: 10/21/2009, 9:41:50 am, Administrator"; 481 footnote2 height=2 "Located at: C:\apache\htdocs\cdiscbuilder\data"; 482 proc report data = work.qs nowindows; 483 column obs libname datvar label type length charcase comment yyy; 484 define obs/computed 'Obs'; 485 define libname/width=20; 486 define datvar/width=50; 487 define label/width=50; 488 define type/width=20; 489 define length/width=50; 490 define comment/width=50; 491 define charcase/width=50; 492 define yyy/ noprint; 493 494 compute yyy; 495 if yyy = "2" then do; 496 call define (_row_,'style','STYLE=[BACKGROUND=cxFFFFCC]'); 497 end; 498 endcompute; 499 500 compute charcase; 501 if charcase='1' then call define 501 ! ('charcase','style','STYLE=[BACKGROUND=CXccffcc JUST=CENTER]'); 502 if charcase='2' then call define 502 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0030 JUST=CENTER]'); 503 if charcase='3' then call define 503 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0094 JUST=CENTER]'); 504 if charcase='4' then call define 504 ! ('charcase','style','STYLE=[BACKGROUND=CXcd00f8 JUST=CENTER]'); 505 if charcase='5' then call define 505 ! ('charcase','style','STYLE=[BACKGROUND=CXcd015c JUST=CENTER]'); 506 if charcase='6' then call define 506 ! ('charcase','style','STYLE=[BACKGROUND=CXcd01c0 JUST=CENTER]'); 507 if charcase='7' then call define 507 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0224 JUST=CENTER]'); 508 if charcase='8' then call define 508 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0288 JUST=CENTER]'); 509 if charcase='9' then call define 509 ! ('charcase','style','STYLE=[BACKGROUND=CXcd02ec JUST=CENTER]'); 510 if charcase='10' then call define 510 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0350 JUST=CENTER]'); 511 if charcase='11' then call define 511 ! ('charcase','style','STYLE=[BACKGROUND=CXcd03b4 JUST=CENTER]'); 512 if charcase='12' then call define 512 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0418 JUST=CENTER]'); 513 if charcase='13' then call define 513 ! ('charcase','style','STYLE=[BACKGROUND=CXcd047c JUST=CENTER]'); 514 if charcase='14' then call define 514 ! ('charcase','style','STYLE=[BACKGROUND=CXcd04e0 JUST=CENTER]'); 17 The SAS System 09:41 Wednesday, October 21, 2009 515 if charcase='15' then call define 515 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0544 JUST=CENTER]'); 516 if charcase='16' then call define 516 ! ('charcase','style','STYLE=[BACKGROUND=CXcd05a8 JUST=CENTER]'); 517 if charcase='17' then call define 517 ! ('charcase','style','STYLE=[BACKGROUND=CXcd060c JUST=CENTER]'); 518 if charcase='18' then call define 518 ! ('charcase','style','STYLE=[BACKGROUND=CXcd0670 JUST=CENTER]'); 519 if charcase='19' then call define 519 ! ('charcase','style','STYLE=[BACKGROUND=CXcd06d4 JUST=CENTER]'); 520 if charcase='20' then call define 520 ! ('charcase','style','STYLE=[BACKGROUND=CXffffcc JUST=CENTER]'); 521 if charcase='21' then call define 521 ! ('charcase','style','STYLE=[BACKGROUND=CX398C54 JUST=CENTER]'); 522 if charcase='22' then call define 522 ! ('charcase','style','STYLE=[BACKGROUND=CX398d1c JUST=CENTER]'); 523 if charcase='23' then call define 523 ! ('charcase','style','STYLE=[BACKGROUND=CX398d80 JUST=CENTER]'); 524 if charcase='24' then call define 524 ! ('charcase','style','STYLE=[BACKGROUND=CX398de4 JUST=CENTER]'); 525 if charcase='25' then call define 525 ! ('charcase','style','STYLE=[BACKGROUND=CX398e48 JUST=CENTER]'); 526 if charcase='26' then call define 526 ! ('charcase','style','STYLE=[BACKGROUND=CX398eac JUST=CENTER]'); 527 if charcase='27' then call define 527 ! ('charcase','style','STYLE=[BACKGROUND=CX398f10 JUST=CENTER]'); 528 if charcase='28' then call define 528 ! ('charcase','style','STYLE=[BACKGROUND=CX398f74 JUST=CENTER]'); 529 if charcase='29' then call define 529 ! ('charcase','style','STYLE=[BACKGROUND=CX398fd8 JUST=CENTER]'); 530 if charcase='30' then call define 530 ! ('charcase','style','STYLE=[BACKGROUND=CX39903c JUST=CENTER]'); 531 if charcase='31' then call define 531 ! ('charcase','style','STYLE=[BACKGROUND=CX3990a0 JUST=CENTER]'); 532 if charcase='32' then call define 532 ! ('charcase','style','STYLE=[BACKGROUND=CX399104 JUST=CENTER]'); 533 if charcase='33' then call define 533 ! ('charcase','style','STYLE=[BACKGROUND=CX399168 JUST=CENTER]'); 534 if charcase='34' then call define 534 ! ('charcase','style','STYLE=[BACKGROUND=CX3991cc JUST=CENTER]'); 535 if charcase='35' then call define 535 ! ('charcase','style','STYLE=[BACKGROUND=CX399230 JUST=CENTER]'); 536 if charcase='36' then call define 536 ! ('charcase','style','STYLE=[BACKGROUND=CX399294 JUST=CENTER]'); 537 if charcase='37' then call define 537 ! ('charcase','style','STYLE=[BACKGROUND=CX3992f8 JUST=CENTER]'); 538 if charcase='38' then call define 538 ! ('charcase','style','STYLE=[BACKGROUND=CX39935c JUST=CENTER]'); 539 if charcase='39' then call define 539 ! ('charcase','style','STYLE=[BACKGROUND=CXffcccc JUST=CENTER]'); 540 if charcase='40' then call define 540 ! ('charcase','style','STYLE=[BACKGROUND=CXffcd30 JUST=CENTER]'); 541 if charcase='41' then call define 18 The SAS System 09:41 Wednesday, October 21, 2009 541 ! ('charcase','style','STYLE=[BACKGROUND=CXffcd94 JUST=CENTER]'); 542 if charcase='42' then call define 542 ! ('charcase','style','STYLE=[BACKGROUND=CXffcdf8 JUST=CENTER]'); 543 if charcase='43' then call define 543 ! ('charcase','style','STYLE=[BACKGROUND=CXffce5c JUST=CENTER]'); 544 if charcase='44' then call define 544 ! ('charcase','style','STYLE=[BACKGROUND=CXffcec0 JUST=CENTER]'); 545 if charcase='45' then call define 545 ! ('charcase','style','STYLE=[BACKGROUND=CXffcf24 JUST=CENTER]'); 546 if charcase='46' then call define 546 ! ('charcase','style','STYLE=[BACKGROUND=CXffcf88 JUST=CENTER]'); 547 if charcase='47' then call define 547 ! ('charcase','style','STYLE=[BACKGROUND=CXffcfec JUST=CENTER]'); 548 if charcase='48' then call define 548 ! ('charcase','style','STYLE=[BACKGROUND=CXffd050 JUST=CENTER]'); 549 if charcase='49' then call define 549 ! ('charcase','style','STYLE=[BACKGROUND=CXffd0b4 JUST=CENTER]'); 550 if charcase='50' then call define 550 ! ('charcase','style','STYLE=[BACKGROUND=CXffd118 JUST=CENTER]'); 551 if charcase='51' then call define 551 ! ('charcase','style','STYLE=[BACKGROUND=CXffd17c JUST=CENTER]'); 552 if charcase='52' then call define 552 ! ('charcase','style','STYLE=[BACKGROUND=CXffd1e0 JUST=CENTER]'); 553 if charcase='53' then call define 553 ! ('charcase','style','STYLE=[BACKGROUND=CXffd244 JUST=CENTER]'); 554 if charcase='54' then call define 554 ! ('charcase','style','STYLE=[BACKGROUND=CXffd2a8 JUST=CENTER]'); 555 if charcase='55' then call define 555 ! ('charcase','style','STYLE=[BACKGROUND=CXffd30c JUST=CENTER]'); 556 if charcase='56' then call define 556 ! ('charcase','style','STYLE=[BACKGROUND=CXffd370 JUST=CENTER]'); 557 if charcase='57' then call define 557 ! ('charcase','style','STYLE=[BACKGROUND=CXffd3d4 JUST=CENTER]'); 558 if charcase='58' then call define 558 ! ('charcase','style','STYLE=[BACKGROUND=CXccccff JUST=CENTER]'); 559 if charcase='59' then call define 559 ! ('charcase','style','STYLE=[BACKGROUND=CXcccd63 JUST=CENTER]'); 560 if charcase='60' then call define 560 ! ('charcase','style','STYLE=[BACKGROUND=CXcccdc7 JUST=CENTER]'); 561 if charcase='61' then call define 561 ! ('charcase','style','STYLE=[BACKGROUND=CXccce2b JUST=CENTER]'); 562 if charcase='62' then call define 562 ! ('charcase','style','STYLE=[BACKGROUND=CXccce8f JUST=CENTER]'); 563 if charcase='63' then call define 563 ! ('charcase','style','STYLE=[BACKGROUND=CXcccef3 JUST=CENTER]'); 564 if charcase='64' then call define 564 ! ('charcase','style','STYLE=[BACKGROUND=CXcccf57 JUST=CENTER]'); 565 if charcase='65' then call define 565 ! ('charcase','style','STYLE=[BACKGROUND=CXcccfbb JUST=CENTER]'); 566 if charcase='66' then call define 566 ! ('charcase','style','STYLE=[BACKGROUND=CXccd01f JUST=CENTER]'); 567 if charcase='67' then call define 567 ! ('charcase','style','STYLE=[BACKGROUND=CXccd083 JUST=CENTER]'); 19 The SAS System 09:41 Wednesday, October 21, 2009 568 if charcase='68' then call define 568 ! ('charcase','style','STYLE=[BACKGROUND=CXccd0e7 JUST=CENTER]'); 569 if charcase='69' then call define 569 ! ('charcase','style','STYLE=[BACKGROUND=CXccd14b JUST=CENTER]'); 570 if charcase='70' then call define 570 ! ('charcase','style','STYLE=[BACKGROUND=CXccd1af JUST=CENTER]'); 571 if charcase='71' then call define 571 ! ('charcase','style','STYLE=[BACKGROUND=CXccd213 JUST=CENTER]'); 572 if charcase='72' then call define 572 ! ('charcase','style','STYLE=[BACKGROUND=CXccd277 JUST=CENTER]'); 573 if charcase='73' then call define 573 ! ('charcase','style','STYLE=[BACKGROUND=CXccd2db JUST=CENTER]'); 574 if charcase='74' then call define 574 ! ('charcase','style','STYLE=[BACKGROUND=CXccd33f JUST=CENTER]'); 575 if charcase='75' then call define 575 ! ('charcase','style','STYLE=[BACKGROUND=CXccd3a3 JUST=CENTER]'); 576 if charcase='76' then call define 576 ! ('charcase','style','STYLE=[BACKGROUND=CXccd407 JUST=CENTER]'); 577 if charcase='77' then call define 577 ! ('charcase','style','STYLE=[BACKGROUND=CX99ccff JUST=CENTER]'); 578 if charcase='78' then call define 578 ! ('charcase','style','STYLE=[BACKGROUND=CX99cd63 JUST=CENTER]'); 579 if charcase='79' then call define 579 ! ('charcase','style','STYLE=[BACKGROUND=CX99cdc7 JUST=CENTER]'); 580 if charcase='80' then call define 580 ! ('charcase','style','STYLE=[BACKGROUND=CX99ce2b JUST=CENTER]'); 581 if charcase='81' then call define 581 ! ('charcase','style','STYLE=[BACKGROUND=CX99ce8f JUST=CENTER]'); 582 if charcase='82' then call define 582 ! ('charcase','style','STYLE=[BACKGROUND=CX99cef3 JUST=CENTER]'); 583 if charcase='83' then call define 583 ! ('charcase','style','STYLE=[BACKGROUND=CX99cf57 JUST=CENTER]'); 584 if charcase='84' then call define 584 ! ('charcase','style','STYLE=[BACKGROUND=CX99cfbb JUST=CENTER]'); 585 if charcase='85' then call define 585 ! ('charcase','style','STYLE=[BACKGROUND=CX99d01f JUST=CENTER]'); 586 if charcase='86' then call define 586 ! ('charcase','style','STYLE=[BACKGROUND=CX99d083 JUST=CENTER]'); 587 if charcase='87' then call define 587 ! ('charcase','style','STYLE=[BACKGROUND=CX99d0e7 JUST=CENTER]'); 588 if charcase='88' then call define 588 ! ('charcase','style','STYLE=[BACKGROUND=CX99d14b JUST=CENTER]'); 589 if charcase='89' then call define 589 ! ('charcase','style','STYLE=[BACKGROUND=CX99d1af JUST=CENTER]'); 590 if charcase='90' then call define 590 ! ('charcase','style','STYLE=[BACKGROUND=CX99d213 JUST=CENTER]'); 591 if charcase='91' then call define 591 ! ('charcase','style','STYLE=[BACKGROUND=CX99d277 JUST=CENTER]'); 592 if charcase='92' then call define 592 ! ('charcase','style','STYLE=[BACKGROUND=CX99d2db JUST=CENTER]'); 593 if charcase='93' then call define 593 ! ('charcase','style','STYLE=[BACKGROUND=CX99d33f JUST=CENTER]'); 594 if charcase='94' then call define 20 The SAS System 09:41 Wednesday, October 21, 2009 594 ! ('charcase','style','STYLE=[BACKGROUND=CX99d3a3 JUST=CENTER]'); 595 if charcase='95' then call define 595 ! ('charcase','style','STYLE=[BACKGROUND=CX99d407 JUST=CENTER]'); 596 if charcase='96' then call define 596 ! ('charcase','style','STYLE=[BACKGROUND=CXffcc99 JUST=CENTER]'); 597 if charcase='97' then call define 597 ! ('charcase','style','STYLE=[BACKGROUND=CXffccfd JUST=CENTER]'); 598 if charcase='98' then call define 598 ! ('charcase','style','STYLE=[BACKGROUND=CXffcd61 JUST=CENTER]'); 599 if charcase='99' then call define 599 ! ('charcase','style','STYLE=[BACKGROUND=CXffcdc5 JUST=CENTER]'); 600 if charcase='100' then call define 600 ! ('charcase','style','STYLE=[BACKGROUND=CXffce29 JUST=CENTER]'); 601 if charcase='101' then call define 601 ! ('charcase','style','STYLE=[BACKGROUND=CXffce8d JUST=CENTER]'); 602 if charcase='102' then call define 602 ! ('charcase','style','STYLE=[BACKGROUND=CXffcef1 JUST=CENTER]'); 603 if charcase='103' then call define 603 ! ('charcase','style','STYLE=[BACKGROUND=CXffcf55 JUST=CENTER]'); 604 if charcase='104' then call define 604 ! ('charcase','style','STYLE=[BACKGROUND=CXffcfb9 JUST=CENTER]'); 605 if charcase='105' then call define 605 ! ('charcase','style','STYLE=[BACKGROUND=CXffd01d JUST=CENTER]'); 606 if charcase='106' then call define 606 ! ('charcase','style','STYLE=[BACKGROUND=CXffd081 JUST=CENTER]'); 607 if charcase='107' then call define 607 ! ('charcase','style','STYLE=[BACKGROUND=CXffd0e5 JUST=CENTER]'); 608 if charcase='108' then call define 608 ! ('charcase','style','STYLE=[BACKGROUND=CXffd149 JUST=CENTER]'); 609 if charcase='109' then call define 609 ! ('charcase','style','STYLE=[BACKGROUND=CXffd1ad JUST=CENTER]'); 610 if charcase='110' then call define 610 ! ('charcase','style','STYLE=[BACKGROUND=CXffd211 JUST=CENTER]'); 611 if charcase='111' then call define 611 ! ('charcase','style','STYLE=[BACKGROUND=CXffd275 JUST=CENTER]'); 612 if charcase='112' then call define 612 ! ('charcase','style','STYLE=[BACKGROUND=CXffd2d9 JUST=CENTER]'); 613 if charcase='113' then call define 613 ! ('charcase','style','STYLE=[BACKGROUND=CXffd33d JUST=CENTER]'); 614 endcomp; 615 616 compute obs; 617 dobs + 1; 618 obs = dobs; 619 endcompute; 620 run; NOTE: There were 11 observations read from the data set WORK.QS. NOTE: PROCEDURE REPORT used (Total process time): real time 0.12 seconds cpu time 0.06 seconds 21 The SAS System 09:41 Wednesday, October 21, 2009 621 run; 622 ods html close; 623 ods listing; NOTE: PROCEDURE DISPLAY used (Total process time): real time 3.68 seconds cpu time 3.03 seconds NOTE: SAS Institute Inc., SAS Campus Drive, Cary, NC USA 27513-2414 NOTE: The SAS System used: real time 4.42 seconds cpu time 3.70 seconds